Body

Type

Straight-through, cast globe valve

Nominal size

1-1/2, 2, 2-1/2, 3, 4, 6, 8 inches

Pressure rating and End connection

Connection type	Pressure rating	Applicable standard
FF	JIS10K	JIS B2210-1984
	ANSI Class 125	ANSI B16.5-1981
	JPI Class 125	JPI-7S-15-1993
RF	JIS10K, 16K, 20K, 30K, 40K	JIS B2210-1984
	ANSI Class 150, 300, 600	ANSI B16.5-1981
	JPI Class150, 300, 600	JPI-7S-15-1993
RJ, LG	ANSI Class 150, 300, 600	ANSI B16.5-1981
RJ, LG	JPI Class 150, 300, 600	JPI-7S-15-1993
Tongue and groove(groove) Male and female(female)	JIS16K, 20K, 30K, 40K	JIS B2202-1984

• Welded end;

SW (1-1/2, 2 inches) BW (2-1/2 to 8 inches)

Material

For body/trim material combinations and operating temperature ranges, refer to Table 1 .

Bonnet

Plain bonnet	-17 to 230 °C
Extension bonnet type 1	-45 to -17 °C and 230 to 566 °C
Extension bonnet type 2	-100 to -45 °C	Integral cast type
Extension bonnet type 2	-196 to -100 °C	Welded type
Bellows type	For operating tempera- ture and pressure range, refer to Fig.3

Note) Take care not to exceed the operating temperature ranges specifled for respective materials.

The valve body material is carbon steel (SCPH2/A216WCB) and plain bonnet.

	Figure 7-a
①Valve plug	SCS24	SCS14A	SCS14A CoCr-A		SCS14A Soft seat
②Cage
③Piston ring*1	General			Oil free	General
	Ni-resist			CoCr-E	---
④Valve stem	SUS316
⑤Seat gasket	Spiral wound(hoop: SUS316, filler: Inorganic paper)			Spiral wound(hoop: SUS316, filler: PTFE)	Spiral wound(hoop: SUS316, filler: Inorganic paper)
⑥Bonnet gasket	SUS316			SUS316(PTFE coating)	SUS316

Note) *1. For gas or steam only.

The valve body material is carbon steel (SCPH2/A216WCB) and Extension bonnet type1.

	Figure 7-a			Figure 7-b
①Valve plug	SCS24	SCS14A	SCS14A CoCr-A	SCS14A	SCS14A CoCr-A
②Cage
③Piston ring*1	Austenitic cast iron
④Seat ring *2	---			SCS14A	SCS14A CoCr-A
⑤Valve stem	SUS316
⑥Seat gasket	Spiral wound(hoop: SUS316, filler: Inorganic paper)			---
⑦Bonnet gasket	SUS316

Note) *1. For gas or steam only.

*2. For split cage only.

The valve body material is stainless steel (SCS13A/A351CF8 or SCS14A/A351CF8M) and plain bonnet

	Figure 7-a
①Valve plug	SCS14	SCS14A CoCr-A		SCS14A Soft seat
②Cage
③Piston ring*1	General		Oil free	General
	Ni-resist		CoCr-E	---
④Valve stem	SUS316
⑤Seat gasket	Spiral wound(Hoop: SUS316, Filler: Inorganic paper)		Spiral wound(Hoop: SUS316, Filler: PTFE)	Spiral wound(Hoop: SUS316, Filler: Inorganic paper)
⑥Bonnet gasket	SUS316		SUS316(PTFE coating)	SUS316

Note) *1. For gas or steam only.

The valve body material is stainless steel (SCS13A/A351CF8 or SCS14A/A351CF8M) and extension bonnet type1

	Figure 7-a			Figure 7-b
①Valve plug	SCS24	SCS14A	SCS14A CoCr-A	SCS14A	SCS14A CoCr-A
②Cage
③Piston ring*1	Austenitic cast iron
④Seat ring *2	---			SCS14A	SCS14A CoCr-A
⑤Valve stem	SUS316
⑥Seat gasket	Spiral wound(Hoop: SUS316, Filler: Inorganic paper)			---
⑦Bonnet gasket	SUS316

Note) *1. For gas or steam only.

*2. For split cage only.

Face-to-face dimensions

Nominal size (inch)	A
Nominal size (inch)	JIS 10KFF, RF ANSI 125FF ANSI 150RF JPI 150RF *	JIS 16KRF	JIS 20KRF JIS 30KRF ANSI 300RF JPI 300RF *	JIS 40KRF ANSI 600RF JPI 600RF *	JIS 16K Tongue and groove Male and female	JIS 20K Tongue and groove Male and female	JIS 30K Tongue and groove Male and female	JIS 40K Tongue and groove Male and female
1-1/2	222	231	235	251	235	236	248	251
2	254	263	267	286	265	267	276	286
2-1/2	276	288	292	311	290	292	303	311
3	298	313	317	337	310	317	326	337
4	352	364	368	394	360	368	379	394
6	451	465	473	508	475	473	486	508
8	543	560	568	610	570	568	580	610

Nominal size (inch)	A
Nominal size (inch)	ANSI 150RJ JPI 150RJ	ANSI 300RJ JPI 300RJ	ANSI 600RJ JPI 600RJ	ANSI 300LG JPI 300LG	ANSI 600LG JPI 600LG	ANSI 150 JPI 150SW, BW*	ANSI 300, 600 JPI 300, 600SW, BW*
1-1/2	235	248	251	244	248	251	251
2	267	283	289	276	283	286	286
2-1/2	289	308	314	302	308	311	311
3	311	333	340	327	333	337	337
4	365	384	397	378	391	394	394
6	464	489	511	483	505	473	508
8	556	584	613	578	606	568	610

Note) * : Face-to-face dimensions conform to following standards.

- IEC 60534-3-1 : 2001 - IEC 60534-3-3 : 1998 (2-1/2 inches or over)

- JIS B 2005-3-1 : 2005 - JIS B 2005-3-3 : 2005 (2-1/2 inches or over)

a. For PSA1 actuator

b. For HA actuator

c. For VA5 actuator

d. For PSA6 actuator

External dimensions [Unit: mm]

Nominal size (inch)	Actuator Model	H					B	ϕ B	E
		Plain bonnet	Extension bonnet Type 1	Extension bonnet Type 2		Bellows type bonnet
		Plain bonnet	Extension bonnet Type 1	Integral cast type	Welded type	Bellows type bonnet
1-1/2	PSA1D, R	466	631	746	986	626	230	218	70
	HA2D, R	500	665	780	1020	660	281	267
	HA3D, R	590	760	875	1140	750	363	350
2	PSA1D, R	466	636	751	991	626	230	218	80
	HA2D, R	500	670	785	1025	660	281	267
	HA3D, R	595	765	875	1140	750	363	350
2-1/2	HA2D, R	575	745/755	880	1130	795	281	267	90
	HA3D, R	630	800/810	930	1180	850	363	350
	HA4D, R	865	1035/1045	1165	1495	-	520	470
3	HA2D, R	580	755/765	900	1135	800	281	267	100
	HA3D, R	635	810/820	955	1190	855	363	350
	HA4D, R	870	1045/1055	1190	1505	-	520	470
4	HA2D, R	610	810/820	915	1150	830	281	267	115
	HA3D, R	660	860/870	1020	1205	880	363	350
	HA4D, R	890	1100/1110	1255	1520	-	520	470
	VA5R	1420	1635	1820	2050	-	-	620
	PSA6R	1255	1470	1655	1855	-	-	476
6	HA3D, R	785	1020/1045	1250	1385	1075	363	350	170
	HA4D, R	955	1190/1215	1425	1570	1245	520	470
	VA5R	1480	1740	1980	2110	-	-	620
	PSA6R	1315	1575	1815	1945	-	-	476
8	HA4D, R	1090	1350	1580	1710	1340	-	470	220
	VA5R	1585	1850	2145	2275	-	-	620
	PSA6R	1735	2000	2295	2425	-	-	476

Note) 1. “H” dimensions are applicable when a hand wheel is not provided. When top mounted hand wheel HA or VA actuators or side mounted hand wheel PSA6R actuators are used, add the hand wheel dimentsions designated in respective speciflcation sheets (No. SS2-8213-0500 for Type HA actuators, No.SS2-8210-0100 for Type VA actuators and SS2-PSA100-0100 for Type PSA actuators).
2.“H” dimensions of Extension bonnet Type 1 are as follows: The left side JIS 10K and ANSI 150, and the right side for JIS 16K and ANSI 300 or over.

Weight [Unit: kg]

Nominal size (inch)	Actuator Model	Weight
		Flanged type JIS 10K, ANSI/JPI 150				Flanged type JIS 16K, 20K, 30K ANSI/JPI 300				Flanged type JIS 40K ANSI/JPI 600				Welded type JIS10K,16K,20K, 30K ANSI/JPI150,300,600
		Plain bonnet	Extension Type 1, Bellows type	Extension Type 2		Plain bonnet	Extension Type 1, Bellows type	Extension Type 2		Plain bonnet	Extension Type 1, Bellows type	Extension Type 2		Plain bonnet	Extension Type 1, Bellows type	Extension Type 2
		Plain bonnet	Extension Type 1, Bellows type	Integral cast type	Welded type	Plain bonnet	Extension Type 1, Bellows type	Integral cast type	Welded type	Plain bonnet	Extension Type 1, Bellows type	Integral cast type	Welded type	Plain bonnet	Extension Type 1, Bellows type	Integral cast type	Welded type
1-1/2	PSA1D, R	24	27	30	32	29	32	35	37	37	40	43	45	29	32	35	37
	HA2D, R	31	34	37	39	36	39	42	44	44	47	50	52	36	39	42	44
	HA3D, R	43	46	49	51	48	51	54	56	56	59	62	64	48	51	54	56
2	PSA1D, R	30	33	36	38	35	38	41	43	40	43	46	48	35	38	41	43
	HA2D, R	37	40	43	45	42	45	48	50	47	50	53	55	42	45	48	50
	HA3D, R	49	52	55	57	54	57	60	62	59	62	65	67	54	57	60	62
2-1/2	HA2D, R	43	47	51	53	48	52	56	58	65	69	73	75	48	52	56	58
	HA3D, R	55	59	63	65	60	64	68	70	77	81	85	87	60	64	68	70
	HA4D, R	86	90	94	96	91	95	99	101	108	112	116	118	91	95	99	101
3	HA2D, R	53	59	65	68	63	69	75	78	85	91	97	100	63	69	75	78
	HA3D, R	65	71	77	80	75	81	87	90	97	103	109	112	75	81	87	90
	HA4D, R	96	102	108	111	106	112	118	121	128	134	140	143	106	112	118	121
4	HA2D, R	63	73	78	81	78	88	93	96	113	123	128	131	75	85	90	93
	HA3D, R	75	85	90	93	90	100	105	108	125	135	140	143	87	97	102	105
	HA4D, R	106	116	121	124	121	131	136	139	156	166	171	174	118	128	133	136
	VA5R	233	243	248	251	248	258	263	266	283	293	298	301	245	255	260	263
	PSA6R	213	223	228	231	228	238	243	246	258	273	278	281	225	235	240	243
6	HA3D, R	157	172	179	182	187	202	209	212	237	252	259	262	117	192	199	202
	HA4D, R	188	203	210	213	218	233	240	243	268	283	290	293	208	223	230	233
	VA5R	315	330	337	340	345	360	367	370	395	410	417	420	335	350	357	360
	PSA6R	295	310	317	320	325	340	347	350	375	390	397	400	315	330	337	340
8	HA4D, R	268	288	298	303	318	338	348	353	438	458	468	473	308	328	338	343
	VA5R	395	415	425	430	445	465	475	480	565	585	595	600	435	455	465	470
	PSA6R	420	440	450	455	470	490	500	505	590	610	620	625	460	480	490	495

Actuator orientation

Note) 1. Indicate by position number when installation other than the standard type is required.

2. With Type PSA6R actuator, the side-mounted hand wheel is mounted on the same side as the positioner.

Pressure Balanced Cage type Control Valve Model HCB

Body

Type

Nominal size

Pressure rating and End connection

Material

Bonnet

The valve body material is stainless steel (SCS13A/A351CF8 or SCS14A/A351CF8M) and plain bonnet

External dimensions [Unit: mm]

Actuator orientation