If you have any questions, please contact us.
Get in touch
The corrosion inhibitor is a compound of modified imidazoline, phosphonate, and penetrant. It is suitable for protecting metals from corrosion caused by production water in oil fields or water in crude oil from single wells. It forms a dense adsorbed deposition film on the metal surface of single-well tubing and gathering pipelines, preventing corrosive substances from corroding the metal of oil wells and pipelines.
|
Item |
Indicators |
|
|
Appearance |
homogeneous liquid |
|
|
pH value |
6~7 |
|
|
Pour point |
≤-10°C |
|
|
Closed-cup flash point |
≥61°C |
|
|
Water-soluble |
Miscible with water in any proportion |
|
|
Emulsification tendency |
No tendency to emulsify |
|
|
Corrosion Inhibition Performance |
Corrosion inhibition rate, % |
≥70 |
|
Pitting corrosion |
No obvious pitting corrosion |
|
Application Method:
This product has good water solubility and can be diluted and added directly to the heated circulating water. The typical addition amount is 30-100 PPM.
Storage and Transportation:
1) This product must be stored in a well-ventilated, dry place, and must be protected from direct sunlight and fire sources.
2) During transportation and handling, handle with care to prevent collisions.
HSE:
During use, workers should wear personal protective equipment to protect their skin and eyes from product splashes. In case of such incidents, immediately rinse with plenty of water. If the situation is serious, seek medical attention promptly. Spilled product should be recovered as much as possible. Small amounts of product can be covered with soil or rinsed with water; rinse water should be discharged into the wastewater system.
Wechat/WhatsApp:
+86-137 5141 1282(Ata Rahimi)
Email:
rahimi@paires-tech.com
Address:
Room 430, Building 1, No. 6, Headquarters 1st Road, Songshan Lake Park, Dongguan City, Guangdong Province.
