If you have any questions, please contact us.
Get in touch
The Ashcroft S10 temperature sensor assemblies provide accurate temperature measurements for most applications. Each temperature sensor assembly consists of a spring loaded temperature sensor insert, a connection head and lag extension. The assembly may also include an optional terminal block for wiring and/or transmitters. Thermocouple assemblies are manufactured to either to IEC 60584-2 or ANSI MC 96.1 and RTD assemblies are manufactured to IEC 60751.
■ Exhaust gas temperature measurements for diesel engines.
■ Oven temperature measurements for industrial drying ovens.
■ Special designs for intrinsically safe and non-incendive application.
KEY BENEFITS
•Flexible designs to work in most applications
•Designs for hazardous locations
Optional S10 Heads
DIMENSIONS in [ ] are millimeters
HOW TO ORDER S10 TEMPERATURE PROBES:
The ordering code is built by selecting the appropriate configuration for the various sections of the ordering code.
The Insert nominal length LN is measured from base of the head to the tip of the probe.
The lag extension length N is measured from the base of the head to the center of the threads on the lag extension.
LN can be calculated by adding the lag extension length N to the probe insertion length L.
The N length and the LN length are added to the end of the ordering code in millimeters.
To convert inches to millimeters multiply by 25.4. mm = inches x 25.4
d = Stem diameter
N = Lag Extension Length
L = Insertion Length
LN = Insert Nominal Length
LN = N + L
Wechat/WhatsApp:
+86-137 5141 1282(Dawei.Cai)
Email:
dawei.cai@paires-tech.com
Address:
Room 430, Building 1, No. 6, Headquarters 1st Road, Songshan Lake Park, Dongguan City, Guangdong Province.
