Industrial probes for chemical, petrochemical and power plants.

 For a wide range of process applications: vapors, gases, liquids and non-abrasive substances, provided that these are compatible with the sheath material

 Flexible configurations, heavy duty MgO

 Special designs for intrinsically safe and non-incendive applications

DESCRIPTION

These probes are supplied as either single or dual sensors. The sensor(s) is (are) housed inside a flexible metal sheath. With or without extension lead wire, process connection on request. If fitted, the extension lead wire (with or without protective spring and/or electromagnetic shielding) can be provided with PVC, silicone, Teflon® or fiberglass insulation. The soldering between the extension lead wire and the sheathed cable is enclosed in a sealed transition.

KEY BENEFITS

•Flexible designs for critical applications

•Fast response times

DIMENSIONS in [ ] are millimeters

HOW TO ORDER S50 TEMPERATURE PROBES:

 The ordering code is built by selecting the appropriate configuration for the various sections of the ordering code.

 The insert nominal length L is measured from base of the cable transition piece to the tip of the probe.

 The lead wire length LC is measured for the base of the lead wire transition piece to the end of the lead wire jacket.

 The L length and the LC length are added to the end of the ordering code in millimeters.

 To convert inches to millimeters multiply by 25.4. mm = inches x 25.4

d = Stem diameter

LC = Length lead wire

L = Insertion length